Journal Papers
December 14, 2020Patents
December 14, 2020Conference Papers
2022
- Karami, F., Saber-Samandari, S., “Synthesis of Carboxymethyl chitosan Alginate Hydrogel wound dressing with the ability to release” 12th National Conference on Recent Researches in Electrical, Computer and Biomedical Engineering, 14 Jun 2022, Iran
2021
- Kabir, H. Saber-Samandari, S. Mohammadi-Aghdam, M., “Fabrication of magnetic scaffold based on HAp/alginate for bone substitute” 8th International E-congress on Nanosciences and Nanotechnology, 17-18 Feb 2021, Iran
- Fallahi, H., Sadighi, M., Saber-Samandari, S., “Effect of the non uniform cross section on mechanical properties of cellular foams by numerical method” The 3rd Conference on mechanical, electrical and computer engineering, 19 Feb 2021, Valencia, Spain
- Fallahi, H., Sadighi, M., Saber-Samandari, S., “Mechanical properties of cellular foams with non uniform cross section by numerical and experimental methods” The 3rd Conference on mechanical, electrical and computer engineering, 19 Feb 2021, Valencia, Spain
2020
- Khalvandi, A., Aghdam, M., Saber-Samandari, S., “Effects of different porosity volume fractions on the mechanical properties and global orthotropic behavior of gelatin closed-cell bio-foams” The 7th International Conference on Composites: Characterization, Fabrication and Application, 23-24 Dec 2020, Iran
- Khalvandi, A., Aghdam, M., Saber-Samandari, S., “Micromechanical modeling of gelatin-based nano-composite bone scaffolds” 27th National and 5th International Iranian Conference of Biomedical Engineering, 20-21 Nov 2020, Iran
- Gitiara, Y., Barbaz-Isfahani, R., Saber-Samandari, S., Sadighi, M., “An experimental study on effect of nanoclay and nano SiO2on mechanical properties of glass epoxy composite on acetic environment, ISME2020, 27-29 May 2020, Iran
2019
- Ghanepour, M., Kazerouni, M., Aghaei, S., Tavakoli, F., Hemati, Y., Saber-Samandari, S., Khandan, A., “New generation of smart bandage chitosan-gelatin/AgO-Np using freeze drying technology for bedsore application” 4th International and 6th National Congress of Wound and Tissue Repair, 19-22 Nov 2019, Iran
- Ghanepour, M., Kazerouni, M., Aghaei, S., Saber-Samandari, S., Khandan, A., “Comparison of smart and conventional bandage to control optimal wound conditions and monitor the emergence of critical wound condition” 4th International and 6th National Congress of Wound and Tissue Repair, 19-22 Nov 2019, Iran
- Kordjamshidi, A., Saber-Samandari, S., Khandan, A., “Development of new generation of synthetic bone substitute for bone implantation approaches using magnetite nanoparticles loaded with anti-inflammatory drugs” 3rd International and 11th National Biotechnology Congress, 1-3 Sep 2019, Iran
- Farazin, A., Aghadavoodi, F., Saber-Samandari, S., Khandan, A., “Fabrication of porous bionanocomposite based reinforced polymers with nano ceramic powders using freeze drying method” 16th Iranian National Congress of Chemical Engineering, 19-21 Jan 2019, Iran
- Farazin, A., Aghadavoodi, F., Saber-Samandari, S., Khandan, A., “Simulation of mechanical properties of PCL porous bionanocomposites using molecular dynamic for biomedical application” 16th Iranian National Congress of Chemical Engineering, 19-21 Jan 2019, Iran
2018
- Moeini, M., Dehnavi, M. R., Barbaz-Isfahani, R., Saber-Samandari, S., Mohammadi- Aghdam, M., “Molecular dynamics investigation of interaction energy between polystyrene/polyethelen and SWCNT, functionalized SWCNT and DWCNT” The 6th International Conference on Composites: Characterization, Fabrication and Application (CCFA-6) 11-12 Dec 2018, Iran
- Maghsoudlou, M. A., Barbaz-Isfahani, R., Saber-Samandari, S., Sadighi, M., “Prediction of the Young’s modulus of SWCNTs/epoxy nanocomposites by considering SWCNTs curvature and local agglomeration” The 6th International Conference on Composites: Characterization, Fabrication and Application (CCFA-6) 11-12 Dec 2018, Iran
- Moeini, M., Sahmani, S., Saber-Samandari, S., Mohammadi Aghdam, M., “The role of functionalized nanoparticles on cross-linked polymer/graphene by molecular dynamics simulation,”First Conference On Mechanical Behavior Modeling Of Materials” 17-18 Oct 2018, Iran.
- Razmjooee, K., Arabzadeh, N., Ahmadi, S., Saber-Samandari, S., “Synthesis and characterization of biopolymer composite for wound dressing,” 3rd Applied Chemistry Seminar, 27-28 Aug 2018, Iran
- Esmaeili, S., Khandan, A., Saber-Samandari, S., “Mechanical performance of three-dimensional bionanocomposite scaffolds designed with digital light processing for biomedical applications,” 12th Iranian Congress of Medical Physics, 21 July 2018, Iran
- Esmaeili, S., Khandan, A., Saber-Samandari, S., “Design porous bio-nanocomposite scaffold based on hydroxyapatite reinforced with carbon nanotube and photopolymer 3D printed used in maxillofacial fracture” 4th International Dental Implant Conference, 25-27 July 2018, Iran
- Kianersi, S., Solouk, A., Saber-Samandari, S., Pasbakhsh, P., “Alginate and Alginate-Gelatin Nanoparticles as Ocular Drug Delivery Vehicles for Glaucoma Therapy,” The First International Iranian Tissue Engineering and Regenerative Medicine Congress, 18-20 July 2018, Iran
- Esmaeili, S., Khandan, A., Saber-Samandari, S., “Preparation and characterization of porous polymer-ceramic bio-nanocomposite implants produced by 3D printing technology” International Congress on Chemistry and Nanotechnology from Research to Technology, 11-12 July 2018, Iran
- Goodarz, M., Bahrami, H., Sadighi, M., Saber- Samandari, S., “An experimental study on quasi-static indentation response of laminated composites interlayered with electrospun nanofibers,” Proceedings of The 7th International Conference On Nanostructures, 27 February 2018 – 01 Mar 2018, Iran.
- Senobartahaei, A., Kabir, M. Z., Saber-Samandari, S., “The investigation of mechanical properties and the enhancement of ductility of glass fiber reinforced polymer composites, using carbon nano tube addition,” Proceedings of The 7th International Conference On Nanostructures, 27 February 2018 – 01 Mar 2018, Iran.
- Karkehabadi, F., Saber-Samandari, S., Saber-Samandari, S., Behpour, M., “Amide functionalized CNT embedded in sodium alginate/hydroxyapatite nanocomposite beads for removal of Co (II) ions from aqueous solutions,” Proceedings of The 7th International Conference On Nanostructures, 27 February 2018 – 01 Mar 2018, Iran.
2017
- Razmjooee, K., Keshvari, H., Saber-Samandari, S., “Synthesis and surface modification of polycaprolactone nanofibers for use in artificial vascular graft,” 24th National and 2nd International Iranian Conference On Biomedical Engineering, 30 November 2017 – 01 Dec 2017, Iran.
- Khandan, A., Ozada, N., Oghbemudia, D., Saber-Samandari, S., “Novel technology for bone cancer treatment by using hyperthermia treatment via bioceramic mechanism,” 6th International Conference On Ultra Fine Grained and Nano-structured Materials, 12-13 Nov 2017, Iran.
2016
- Shahmohamadi, A., Salehi, M., Sadighi, M., Saber-Samandari, S., “Improving mechanical properties of composites by nanoparticles using a three dimensional model,” 40th Solid Mechanics Conference, 29 August-02 Sep, 2016, Poland
- Zare, A., Saber-Samandari, S., Saber-Samandari, S., Zamanian, A. “Synthesis and characterization of gelatin based scaffold with sufficient mechanical properties for bone implant,” 1st International Conference On New Research Achievements, In Mechanics, Mechatronics and Biomechanics, 26 May 2016, Iran.
- Ghadami, F., Saber-Samandari, S., Rouhi, G. H., Amani, M., Dehghan, M., Mohajeri, M., Mashhadi Abbas, F., “The influence of hydroxyapatite coating techniques on osseointegration: An animal study,” Orthopaedic Research Society, 05-08 Mar 2016, USA.
2015
- Moharrer, Y., Saber-Samandari, S., Rouhi, G.H. ” In vitro degradation of HA/silica coated AZ91 magnesium alloy in SBF,” 7th International Symposium On Biodegradable Metals for Biomedical Applications, 23-28 Aug 2015, Italy.
- Moharrer, Y., Saber-Samandari, S., Rouhi, G.H. “In vitro corrosion behaviour of MAO and silica coated AZ91 magnesium alloy,” 7th International Symposium On Biodegradable Metals for Biomedical Applications, 23-28 Aug 2015, Italy.
2014
- Heydari Meybodi M., Saber-Samandari S., Sadighi M., “A study on nanocomposite beam response under low-velocity impact based on an analytical model”. 4th International Conference on Composites: Characterization, Fabrication, and Application, 16-17 Dec 2014, Tehran, Iran
- Heydari Meybodi M., Saber-Samandari S., Sadighi M., “3D Finite element modeling of Young’s modulus of nanoclays/polymer composites”. 4th International Conference on Composites: Characterization, Fabrication, and Application, 16-17 Dec 2014, Tehran, Iran
2013 and prior
- Alamara K., Saber-Samandari S. and Berndt C. C., “Effect of substrate roughness on splat formation of thermally sprayed polymer.” ITSC, 27-29 Sep 2011, Hamburg, Germany
- Xie W., Saber-Samandari S., Wang J. and Berndt C.C., “Effect of stand off distance on EMAA splats deposited onto glass and mild steel substrates.” ITSC, 3-5 May 2010, Fairmont, Singapore
- Saber-Samandari S., Berndt C. C., Gross K. A. and Wang J., “A morphological study of hydroxyapatite splats flame-sprayed onto commercially pure titanium.” ITSC, 3-5 May 2010, Fairmont, Singapore
- Gross K. A. and Saber-Samandari S., “Mechanical testing of single splats using nanoindentation.” ITSC, 4-7 May 2009, Las Vegas, USA
- Gross K. A. and Saber-Samandari S., “Assessing mechanical properties on the surface of hydroxyapatite coatings.” 16th IFHTSE congress, 30 Oct-2 Nov 2007, Brisbane, Australia
- Gross K. A., Saber-Samandari S. and Heemann K. S., “Probing micromechanical properties of hydroxyapatite coatings in implants and histological sections.” 16th IFHTSE congress, 30 Oct-2 Nov 2007, Brisbane, Australia
