Journal Papers

  • Maghsoudlou, M. A., Nassireslami, E., Saber-Samandari, S., Khandan, A., “Bone regeneration using bio-nanocomposite tissue reinforced with bioactive nanoparticles for femoral defect applications in medicine” Avicenna J. Medical Biotechnology, 2020; 12(2), 68-76
  • Moeini, M., Barbaz-Isfahani, R., Saber-Samandari, S., Mohammadi-Aghdam, M., “Molecular dynamics simulations of the effect of temperature and strain rate on mechanical properties of graphene–epoxy nanocomposites” Molecular Simulation, 2020; 46(6), 476-486
  • Hashemi, A., Esmaeili, S., Ghadiri Nejad, M., Saber-Samandari, S., Sheikhbahaei, E., Kordjamshidi, A., Khandan, A., “Micro-Finite Element Model to Investigate the Mechanical Stimuli in Scaffolds Fabricated via Space Holder Technique for Cancellous Bone” International J Advanced Design and Manufacturing Technology, 2020; 13(1), 51-58
  • Monshi, M., Esmaeili, S., Kolooshani, A., Kamyab Moghadas, B., Saber-Samandari, S., Khandan, A., “A novel three-dimensional printing of electroconductive scaffolds for bone cancer therapy application” Nanomedicine J., 2020, 7(2), 85-95
  • Sahmani, S., Khandan, A., Saber-Samandari, S., Mohammadi-Aghdam, M., “Effect of magnetite nanoparticles on the biological and mechanical properties of hydroxyapatite porous scaffolds coated with ibuprofen drug” Materials Science and Engineering C., 2020; 111, 11083
  • Akbari Aghdam, H., Sanatizadeh, E., Motififard, M., Aghadavoudi, F., Saber‑Samandari, S., Esmaeili, S., Sheikhbahaei, E., Safari, M., Khandan, A., “Effect of calcium silicate nanoparticle on surface feature of calcium phosphates hybrid bio-nanocomposite using for bone substitute application” Powder Technology, 2020; 361, 917–929
  • Esmaeili, S., Akbari Aghdam, H., Motififard, M., Saber‑Samandari, S., Montazeran, A. H., Bigonah, M., Sheikhbahaei, E., Khandan, A., “A porous polymeric–hydroxyapatite scaffold used for femur fractures treatment: fabrication, analysis, and simulation” European J. Orthopaedic Surgery & Traumatology, 2020; 30(1), 123-131
  • Sahmani, S., Khandan, A., Esmaeili, S., Saber-Samandari, S ., Ghadiri Nejad, M., Aghdam, M. M., “Calcium phosphate-PLA scaffolds fabricated by fused deposition modeling technique for bone tissue application: Fabrication, characterization and simulation” Ceramics International, 2020; 46, 2447-2456

  • Goodarz, M., Bahrami, H., Sadighi, M., Saber-Samandari , S., “Low-velocity impact performance of nanofiber-interlayered aramid epoxy nanaocomposites” Composites Part B, 2019;173(1), 106975
  • Maghsoudlou, M. A., Barbaz Isfahani, R., Saber-samandari, S., Sadighi, M., “Effect of interphase,curvature and agglomeration of SWCNTs on mechanical properties of polymer-based nanocomposites  Experimental and numerical investigations” Composites Part B, 2019; 175(1), 107119
  • Farazin, A., Akbari-Aghdam, H., Motififard, A., Saber-Samandari, S., Esmaeili, S ., Khandan, A., “A polycaprolactone bio-nanocomposite bone substitute fabricated for femoral fracture approaches: Molecular dynamic and micromechanical Investigation” J. Nanoanalysis, 2019; 6(3), 72-184
  • Saber-Samandari, S., Mohammadi-Aghdam, M., Saber-Samandari, S., “A novel magnetic bifunctional nanocomposite scaffold for photothermal therapy and tissue engineering”  International J. Biological Macromolecules, 2019: 138(1), 810-818 
  • Razmjooee, K., Saber-Samandari, S., Keshvari, H., Ahmadi, S., “Improving anti thrombogenicity of nanofibrous polycaprolactone through surface modification” J. Biomaterials Applications, 2019; 34(3), 408-418
  • Sahmani, S., Saber-Samandari, S., Aghdam, M., khandan A., “Influence of MgO nanoparticles on the mechanical properties of coated hydroxyapatite nanocomposite scaffolds produced via space holder technique:  Fabrication, characterization and simulation” J. Mechanical Behavior of Biomedical Materials, 2019; 95, 76-88
  • Kordjamshidi, A., Saber-Samandari, S., Ghadiri Nejad, M., Khandan, A., “Preparation of novel porous calcium silicate scaffold loaded by celecoxib drug using freeze drying technique: Fabrication, characterization and simulation” Ceramics International, 2019; 45(11), 14126-14135
  • Esmaeili, S., Shahali, M., Kordjamshidi, A., Torkpoor, Z., Namdari, F.,
    Saber-Samandari, S., Ghadiri Nejad, M., Khandan, A., ” An artificial blood vessel fabricated by 3D printing for pharmaceutical application” Nanomedicine J., 2019; 6(3), 85-96
  • Zolghadri, M., Saber-Samandari, S., Ahmadi, S., Alamara, K., “Synthesis and characterization of porous cytocompatible scaffold from polyvinyl  alcohol-chitosan” Bulletine of Materials Science, 2019; 42(1), 35
  • Rafieerad, A R., Bushroa, A. R., Nasiri-Tabrizi, B., Baradaran, S., Amiri, A.,
     Saber-Samandari, S., Khanahmadi, S., Zeimaran, E., Basirun, W. J., Kalaiselvam, K., Vellasamy, K. M., Vadivelu, K., “Simultaneous enhanced antibacterial and osteoblast cyocompatibility performace of Ti6Al7Nb implant by nano-silver/graphene oxide decorated mixed oxide nanotube composite” Surface and Coatings Technology, 2019; 360(1), 181-195
  • Sahmani, S., Shahali, M., Ghadiri Nejad, M., Khandan, A., Aghdam, M. M.,
    Saber-Samandari, S., “Effect of copper oxide nanoparticles on electrical conductivity and cell viability of calcium phosphate scaffold with improved mechanical strength for bone tissue engineering” European Physical J. Plus,
    2019; 134(1), 7-18
  • Bahrami-Karkevandi, M., Nasiri-Tabrizi, B., Wong, K. Y., Ebrahimi-Kahrizsangi, R., Fallahpour, A., Saber-Samandari, S., Baradaran, S., Basirun, W. J., “Mechanochemistry approach to produce in-situ tungsten borides and carbides nanopowders: Experimental study and modeling” Materials Chemistry and Physics, 2019; 224(1), 47-6
  • Sahmani, S., Saber-Samandari, S., Khandan, A., Aghdam, M. M., “Nonlinear resonance investigation of nanoclay based bionanocomposite scaffolds with enhanced properties for bone substitute applications” J. Alloys and compounds, 2019; 773(1), 636-653
  • Bhullar, S. K., Ruzgar, D. G., Forturato, G., Aneja, G. K., Orhan, M., Saber-Samandari, S., Sedighi, M., Ahadian,  S., Ramalingam, M., “A facile method for controlled fabrication of hybrid silver nano particle-Poly(e-caprolactone) fibrous constructs with antimicrobial properties” J. Nanoscience and Nanotechnology, 2019; 19, 6949-6955
  • Ghadami, F., Saber-Samandari, S., Rouhi, G. H., Amani-Hamedani, M., Dehghan, M. M., Mohajeri, S. F., Mashhadi-Abbas, F., Gholami, H., “The effects of bone implants’ coating mechanical properties on osseointegration: In-vivo, in-vitro, and histological investigations” Biomedical Materials Research Part A, 2018; 106(10), 2679-2691
  • Bhullar, S. K., Ruzgar, D. G., Saber-Samandari, S., Sadighi, M., Ahadian, S., Ramalingam, M., “Impact of nanophase hydroxyapatite-based biomaterials on tissue engineering” J. Bionanoscience, 2018; 12(4), 469-477
  • Sahmani, S., Saber-Samandari, S., Aghdam, M. M., Khandan, A., “Nonlinear resonance response of porous beam-type implants corresponding to various morphology shapes for bone tissue engineering applications” J. Materials Engineering and Performance, 2018; 27(10), 5370-5383
  • Joneidi-Yekta, H., Shahali, M., Khorshidi, S., Rezaei, S., Montazeran, A. H., Saber- Samandari, S., Ogbemudia, D., Khandan, A., “Mathematically and experimentally defined porous bone scaffold produced for bone substitute application” Nanomedicine J., 2018; 4(1), 227-234
  • Saber-Samandari, S., Baradaran, S., Nasiri-Tabrizi, B., Alamara, K., Basirun, W. J., “Microstructural evolution and micromechanical properties of thermally sprayed hydroxyapatite coating” Advances in Applied Ceramics, 2018; 117(8), 452-460
  • Sahmani, S., Saber-Samandari, S., Shahali, M., Joneidi Yekta, H., Aghadavoudid, F., Montazeran, A. H., Aghdam, M. M., Khandan, A., “Mechanical and biological performance of axially bionanocomposite sandwich plate-type implant coated by biological polymer loaded novel thin film” Journal of the Mechanical Behavior of Biomedical Materials, 2018; 88(1), 238-250
  • Shojaei Abari, A., Alizadeh, M., Barbaz Isfahani, R., Saber-Samandari, S., “Investigation of wear, hardness, microstructure properties and corrosion resistance of coated st52 steel by WC-Ni particles produced by tungsten -gas arc welding process” J. Advanced Materials and Novel Coatings, 2018; 21, 1475-1488
  • Sahmani, S., Shahali, M., Khandan, A., Saber-Samandari, S., Aghdam, M.M., “Analytical and experimental analyses for mechanical and biological characteristics of novel nanoclay bio-nanocomposite scaffolds fabricated via space holder technique” Applied Clay Science, 2018;165(1), 112-123
  • Saber-Samandari, S., Baradaran, S., Nasiri-Tabrizi, B., Alamara, K., Basirun, W. J., “Severe sink-in occurrence in thermally sprayed hydroxyapatite coating” Processing and Application of Ceramics, 2018; 12(2), 189-197
  • Sarraf, M., Dabbagh, A., Abdul Razak, B., Mahmoodian, R., Nasiri-Tabrizi, B., Madaah Hosseini, H., Saber-Samandari, S., Hayaty Abu Kasim, N., Abdullah, H., Liana Sukiman N., “Highly-ordered TiO2 nanotubes decorated with Ag2O nanoparticles for improved biofunctionality of Ti6Al4V” J. Surface and Coatings Technology, 2018; 349(1), 1008-1017
  • Montazeran A.H., Saber-Samandari, S., Khandan, A., “Artificial intelligence investigation of three silicates bioceramics magnetite bio-nanocomposite: Hyperthermia and biomedical applications” Nanomedicine J., 2018; 5(3), 163-171
  • Sarraf, M., Dabbagh, A., Abdul Razak, B., Nasiri-Tabrizi, B., Madaah Hosseini, H. R., Saber-Samandari, S., Abu Kasim, N. H., Kah Yean, L., Liana Sukiman, L., “Silver oxide nanoparticles-decorated tantala nanotubes for enhanced antibacterial activity and osseointegration of Ti6Al4V” Materials & Design, 2018; 154, 28-40
  • Sahmani, S., Khandan, A., Saber-Samandari, S., Aghdam, M. M “Nonlinear bending and instability analysis of bioceramics composed with magnetite nanoparticles: Fabrication, characterization, and simulation” Ceramics International, 2018; 44(8), 9540-9549
  • Rafieerad, A. R., Bushroa, A. R., Amiri, A., Gopinath, V., Sookhakian, M., Baradaran, S., Rafieerad, M., Saber-Samandari, S., Vadivelu, J., “Large-scale hybrid silver nanowall-reduced graphene oxide biofilm: A novel morphology by facile electrochemical deposition”, J. Surface and Coatings Technology, 2018; 347(1), 297-303
  • Ghayour, H., Abdellahi, M., Ghadiri Nejad, M., Khandan, A., Saber-Samandari, S., “Study of the effect of the Zn2+ content on the anisotropy and specific absorption rate of the cobalt ferrite: the application of Co1−xZnxFe2O4 ferrite for magnetic hyperthermia” J. Australian Ceramic Society, 2018; 54(2), 223-230
  • Sahmani, S., Khandan, A., Saber-Samandari, S., Aghdam, M. M., “Vibrations of beam-type implants made of 3D printed bredigite-magnetite bio-nanocomposite scaffolds under axial compression: Application, communication and simulation” Ceramics International, 2018; 44(10), 11282-11291
  • Basirun, W. J., Nasiri-Tabrizi, B., Baradaran, S., Saber-Samandari, S., “Overview of hydroxyapatite–graphene nanoplatelets composite as bone graft substitute: Mechanical behavior and in-vitro biofunctionality” Critical Reviews in Solid State and Materials Sciences, 2018; 43(3), 177-212
  • Goodarz, M., Bahrami, H., Sadighi, M., Saber-Samandari, S., “Quasi-static indentation response of aramid fiber/epoxy composites containing nylon 66 electrospun nano-interlayers” J. Industrial Textiles, 2018; 47(5), 960-977
  • Abdellahi, M., Najfinezhad, A., Saber-Samanadari, S., Khandan, A., Ghayour, H., “Zn and Zr co-doped M-type strontium hexaferrite: Synthesis, characterization and hyperthermia application” Chinese J. Physics, 2018; 56(1), 331-339
  • Saber-Samandari, S., Yekta, H., Ahmadi, S., Alamara, K., “New the role of titanium dioxide on the morphology, microstructure, and bioactivity of grafted cellulose hydroxyapatite nanocomposites for a potential application in bone repair” International J. Biological Macromolecules, 2018; 106(1), 481-488
  • Baradaran, S., Nasiri-Tabrizi, B., Shirazi, F., Saber-Samandari, S., Shahtalebi, S., Basirun, W. J., “Wet chemistry approach to the preparation of tantalum-doped hydroxyapatite, Dopant content effects” Ceramics International, 2018; 44(3), 2768-2781
  • Khandan, A., Ozada. N., Saber-Samandari, S., Ghadiri Nejad, M., “On the mechanical and biological properties of bredigite-magnetite (Ca7MgSi4O16-Fe3O4) nanocomposite scaffolds” Ceramics International, 2018; 44(3), 3141-3148
  • Najafinezhad, A., Abdellahi, M., Saber-Samandari, S., Ghayour, H., Khandan, A., “Hydroxyapatite- M type strontium hexaferrite, A new composite for hyperthermia applications, J. Alloys and Compounds, 2018; 734(1), 290-300
  • Hajinasab, A., Saber-Samandari, S., Ahmadi, S., Alamara, K., “Preparation and characterization of a biocompatible magnetic scaffold for biomedical engineering” Materials Chemistry and Physics, 2018; 204(1), 378-387
  • Saber-Samandari, S., “Plasma sprayed nano-hydroxyapatite coatings on titanium alloys” J. Advanced Materials and Novel Coatings, 2017; 20, 1407-1413
  • Maghsudlurad, M. A., Barbaz Isfahani, R., Saber-Samandari, S., Sadighi, M., “Prediction of elastic modulus of epoxy/single wall carbon nanotube composites by considering interfacial debonding” J. Advanced Materials and Novel Coatings, 2017; 19, 1371-1379
  • Salami, M.A., Kaveian,F., Rafienia, M., Saber-Samandari, S., Khandan, A. Naeimi, M. “Electrospun polycaprolactone lignin based nanocomposite as a novel tissue scaffold for biomedical applications” Medical Signals and Sensors, 2017; 7(1), 228-238
  • Karamian E., Nasehi A., Saber-Samandari S., Khandan A. “Fabrication of hydroxyapatite-baghdadite nanocomposite scaffolds coated by PCL-Bioglass with polyurethane polymeric sponge technique” Nanomedicine J., 2017; 4(3), 177-183
  • Abdellahi M., Najafinezhad A., Ghayour H., Saber-Samandari S., Khandan A. “Preparing diopside nanoparticle scaffolds via space holder method simulation of the compressive strength and porosity” J. Mechanical Behavior of Biomedical Materials, 2017; 72(1), 171-181
  • Hosseini, S.A., Saber-Samandari S. and Moghadam R. “Multiscale modeling of interface debonding effect on mechanical properties of nanocomposites” Polymer Composites, 2017; 38(4), 789-796
  • Abd-Khorsand S., Saber-Samandari S., Saber-Samandari S. “Development of nanocomposite scaffolds based on TiO2 dopped in grafted chitosan-hydroxyapatite by freeze drying method and evaluation of biocompatibility” International J. Biological Macromolecules, 2017; 101, 51-58
  • Goodarz M., Bahrami S. H., Sadighi M., Saber-Samandari S. “The influence of graphene reinforced electrospun nano-interlayers on quasi-static indentation behavior of fiber-reinforced epoxy composites” Fibers and Polymers, 2017; 18(2), 322-333
  • Saber-Samandari S., Saber-Samandari S. “Biocompatible nanocomposite scaffolds based on copolymer-grafted chitosan for bone tissue engineering with drug delivery capability” Materials Science and Engineering C, 2017; 75, 721-732
  • Beladi F., Saber-Samandari S., Saber-Samandari S. “Cellular compatibility of nanocomposite scaffolds based on hydroxyapatite entrapped in cellulose network for bone repair” Materials Science and Engineering C, 2017; 75, 385-392
  • Saber-Samandari S., Saber-Samandari S., Joneidi-Yekta H., Mohseni M. “Adsorption of anionic and cationic dyes from aqueous solution using gelatin-based magnetic nanocomposite beads comprising carboxylic acid functionalized carbon nanotube” Chemical Engineering J., 2017; 308, 1133-1144
  • Heydari‑Meybodi, M., Saber‑Samandari, S.,Sadighi, M., “Experimental dynamic analysis of polymer-based nanocomposite beams under low-velocity impact loading”, Iranian Polymer J., 2017; 26(12), 929-940
  • Asadian-Ardakani V., Saber-Samandari S., Saber-Samandari S. “The effect of hydroxyapatite in biopolymer-based scaffolds on release of naproxen sodium” J. Biomedical Materials Research A, 2016; 104(12), 2992-3003
  • Zare-Harofteh A., Saber-Samandari S., Saber-Samandari S. “The effective role of akermanite on the apatite-forming ability of gelatin scaffold as a bone graft substitute” Ceramics International, 2016; 42(15), 17781-17791
  • Heydari-Meybodi M., Saber-Samandari S., Sadighi M. “An experimental study on low-velocity impact response of nanocomposite beams reinforced with nanoclay” Composites Science and Technology, 2016; 133(1), 70-78
  • Saber-Samandari S., Saber-Samandari S., Ghonjizade-Samani F., Aghazadeh J.,Sadeghi A. “Bioactivity evaluation of novel nanocomposite scaffolds for bone tissue engineering- The impact of hydroxyapatite” Ceramics International, 2016; 42(9), 11055-11062
  • Heydari-Meybodi M., Saber-Samandari S., Sadighi M. “3D multiscale modeling to predict the elastic modulus of polymer nanoclay composites considering realistic interphase property” Composite Interfaces, 2016; 23(7), 641-661
  • Saber-Samandari S., Nezafati N., Saber-Samandari S. “The effective role of hydroxyapatite-based composites in anticancer drug-delivery systems” Critical Reviews™ in Therapeutic Drug Carrier Systems, 2016; 33(1), 41-75
  • Saber-Samandari S., Saber-Samandari S. Kiyazar S., Aghazadeh J., Sadeghi A. “In vitro evaluation for apatite-forming ability of cellulose-based nanocomposite scaffolds for bone tissue engineering” International J. Biological Macromolecules, 2016; 86, 434-442
  • Karkeh-Abadi F., Saber-Samandari S., Saber-Samandari S. “The impact of functionalized CNT in the network of sodium alginate-based nanocomposite beads on the removal of Co(II) ions from aqueous solutions” J. Hazardous Materials, 2016; 312, 224-233
  • Maleki Moghadam R, Saber-Samandari S. and Hossaini, S.A. “On the tensile behavior of clay-epoxy nanocomposite considering interphase debonding damage via mixed-mode cohesive zone material” J. Composites Part B, 2016; 89, 303-315
  • Saber-Samandari S., Saber-Samandari S., Heydaripour S. and Abdouss M. “Novel carboxymethyl cellulose based nanocomposite membrane: Synthesis, characterization and application in water treatments” J. Environmental Management, 2016; 166(1), 457-465
  • Saber-Samandari S., Hamed Yekta and Saber-Samandari S., “Effect of iron substitution in hydroxyapatite matrix on swelling properties of composite bead” J. Mineral, Metal and Material Engineering, 2015; 1, 19-25
  • Heydari M., Saber-Samandari S. and Sadighi M. “A new approach for prediction of elastic modulus of polymer nanoclay composites by considering interfacial debonding: Experimental and numerical investigations.” Composites Science and Technology, 2015; 117, 379-385
  • Heydari M., Saber-Samandari S., Sadighi M. and Bagheri M. “Low-velocity impact response of a nanocomposite beam using an analytical model.” Latin American Journal of Solids and Structures, 2015; 12(2), 333-354
  • Saber-Samandari S., Gulcan H. Saber-Samandari S. and Gazi M., “Efficient removal of anionic and cationic dyes from an aqueous solution using pullulan-graft-polyacrylamide porous hydrogel.” Water, Air and Soil Pollution, 2014; 225(11), 2177-2190
  • Saber-Samandari S., Saber-Samandari S., Nezafati N. and Yahya K., “Efficient removal of lead (II) ions and methylene blue from aqueous solution using chitosan/Fe-hydroxyapatite nanocomposite beads.” J. Environmental Management, 2014; 146(1), 481-490
  • Saber-Samandari S., “A numerical study on reinforced composites by spherical nano-particles.” International J. Nano Dimension, 2014; 5(6), 511-517
  • Saber-Samandari S., “Elastic modulus measurement of polymer matrix nano-composites reinforced by platelet nano-clays.” International J. Nano Dimension, 2014; 5(3), 273-278
  • Saber-Samandari S., “Finite element modeling of polymer matrix nano-composites reinforced by nano-cylindrical fillers.” International J. Nano Dimension, 2014; 5(4), 371-377
  • Saber-Samandari S., Alamara K. and Saber-Samandari S., “Calcium phosphate coatings: Morphology, micro-structure and mechanical properties.” J. Ceramics International, 2014; 40(1), 563-572
  • Saber-Samandari S., Alamara K., Saber-Samandari S. and Gross K. A., “Micro-Raman spectroscopy shows how the coating process affects the characteristics of hydroxyapatite.” J. Acta Biomaterialia, 2013; 9(12), 9538-9546
  • Saber-Samandari S., Saber-Samandari S. and Gazi M., “Cellulose-graft-polyacrylamide/hydroxyapatite composite hydrogel with possible application in removal of Cu(II) ions.” J. Reactive and Functional Polymers, 2013; 73(11), 1523-1530
  • Saber-Samandari S., Saber-Samandari S., Gazi M., Cebeci F. C. and Talasaz E., “Synthesis, characterization and application of cellulose based nano-composite hydrogels.” J. Macromolecular Science, Part A, 2013; 50(11), 1131-1141
  • Saber-Samandari S. and Gross K. A., “Contact nano-fatigue testing determines mechanical endurance of amorphous calcium phosphate coatings on Ti, Co-Cr and stainless steel.” Acta Biomaterialia, 2013; 9(3), 5788-5794
  • Alkatib A., Manton D. J., Burrow M. F., Saber-Samandari S., Palamara J. E. A., Gross K. A. and Reynolds E. C., “Effect of bleaching agents and Tooth MoussesTM on human enamel hardness.”  J. Investigative and Clinical Dentistry, 2013; 4(2), 94-100
  • Saber-Samandari S. and Gross K. A., “Nano-indentation on amorphous calcium phosphate splat: effect of droplet size on mechanical properties.” J. the Mechanical Behavior of Biomedical Materials, 2012; 16 (1), 29-37
  • Gross K. A., Young C. J., Beck M., Keebaugh E., Bonts T., Saber-samandar S., and Riley D., “Characterization and dissolution of functionalized amorphous calcium phosphate biolayers  using single-splat technology.” J. Acta Biomaterialia, 2011; 7 (5), 2270-2275
  • Saber-samanadari S., Berndt  C. C. and Gross K. A., “Selection of the implant and coating materials for optimized performance by means of nanoindentation.” J. Acta Biomaterialia, 2011; 7 (2) 874-881
  • Alamara K., Saber-Samandari S., Paul R. Stoddart and Berndet C. C., “Effect of substrate temperature on the splat  formation of flame sprayed polypropylene.” J. Surface and Coatings Technology, 2011; 206 (6), 1180-1187
  • Saber-samandari S. and Gross K. A., “Amorphous calcium phosphate offers improved crack resistance: A design feature from nature?” J. Acta Biomaterialia, 2011; 7 (12), 4235-4241
  • Alamara K. Saber-samandari S. and berndt C. C., “Splat taxonomy of polymeric thermal spray coating.” J.Surface and Coatings Technology, 2011; 205 (21-25), 5028-5034
  • Alamara K., Saber-Samandari S. and Berndt C. C., “Splat formation of polypropylene flame sprayed onto a flat surface.” J. Surface and Coatings Technology, 2010; 205 (7), 2518-2514
  • Saber-Samandari S. and Gross K. A., “The use of thermal printing to control the properties of calcium phosphate deposits.” Biomaterials, 2010; 31 (25), 6386-6393
  • Saber-Samandari S. and Berndt C. C., “Thermal spray coatings- A technology review.” J. International Heat Treatment and Surface Engineering, 2010; 4 (1), 7-13
  • Gross K. A., Saber-Samandari S. and Heemann K. S., “Evaluation of commercial implants with nanoindentation defines future development needs for hydroxyapatite coatings.” J. Biomedical Materials Research Part B, 2010; 93 (1), 1-8
  • Saber-Samandari S. and Gross K. A., “Nanoindentation on the surface of thermally sprayed coatings.” J. Surface and Coatings Technology, 2009; 203 (23), 3516-3520
  • Saber-Samandari S. and Gross K. A., “Effect of angled indentation on mechanical properties.” J. European Ceramic Society, 2009; 29 (12), 2461-2467
  • Gross K. A. and Saber-Samandari S., “Revealing micromechanical properties of a suspension plasma sprayed coatings with nanoindentation.” J. Surface and Coatings Technology, 2009; 203 (20-21), 2995-2999
  • Saber-Samandari S. and Gross K. A., “Micromechanical properties of single crystal hydroxyapatite by nanoindentation.” J. Acta Biomaterialia, 2009; 5 (6), 2206-2212
  • Saber-Samandari S. and Gross K. A., “Nanoindentation reveals mechanical properties within thermally sprayed hydroxyapatite coatings.” J. Surface and Coatings Technology, 2009; 203 (12), 1660-1664
  • Saber-Samandari S., Afaghi-Khatibi A. and Basic D., “An experimental study on clay / epoxy nanocomposites produced in a centrifuge.” J. Composites Part B: Engineering, 2007; 38 (1), 102-107
  • Gross K. A. and Saber-Samandari S., “Nanomechanical properties of hydroxyapatite coatings with a focus on the single solidified droplet.” J. Australian Ceramic Society, 2007; 43 (2), 98-101
  • Saber-Samandari S. and Afaghi-Khatibi A., “Evaluation of elastic modulus of polymer matrix nanocomposites.” J. Polymer Composites, 2007; 28 (3), 405- 411
  • Saber-Samandari S. and Afaghi-Khatibi A., “The effect of interphase on the elastic modulus of polymer based nanocomposites.” J. Key Engineering Materials, 2006; 312, 199-204